A-A-50598
f. Components of the paint system, when tested as specified in Method 4335 of Federal Test Standard Number 141, shall be accomplished using a paint roller system and without causing excessive drag on the roller cover.
g. When dry, the coated, surface shall exhibit good adhesion with a smooth, uniform appearance, and shall be free from sags, runs, wrinkles, roller marks, or any other film defects.
h. Components of the paint system shall be certified mercury free.
i. Components of the paint system shall contain no radioactive material other than that which is naturally occurring, and shall not rely on radioactive decay of any of its constituents to produce luminescence.
6. Paint Rollers, 7-Inch
a. Shall be in accordance with Federal Specification H-R-550.
b. Shall have plastic grips.
7. Paint Roller Covers, 7-Inch
a. Shall be fine nap, having a pile height between 1/8 inch and 3/8 inch.
b. Shall be slip off.
c. Shall be chemically resistant to all paints provided under this document.
8. Stencils
a. The designs for stencils to be provided by the contractor shall be as specified in figure 1 (surface ship kit) and figure 2 (submarine kit).
b. A maximum tolerance of 1/32 inch for each dimension will be allowed for the cut stencils.
c. Shall be constructed of clear plastic between 1/32 and 1/16, inch thick.
d. Shall be chemically resistant to stencil paint TT-E-489.
e. Shall resist capillary action of the stencil paint.
f. Shall be cleaned after paint has dried on it.
g. Shall be resistant to cracking, tearing, and deformation for a minimum of 1000 applications of striping paint TT-E-489.
h. If any stencil fails to meet the requirements set forth in this document the contractor shall provide a replacement.
i. Stencil package shall be clearly labeled as to its content, surface ship or submarine stencils.
9. Application Instructions. The manufacturer shall provide detailed application instructions with each photoluminescent marking kit.
Quality assurance provisions None additional.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business