INCH --- POUND
MIL --- PRF --- 51483A(EA)
8 June 2011
SUPERSEDING
MIL --- E --- 51483(EA)
29 June 1981
PERFORMANCE SPECIFICATION
EDGESEAL MATERIAL, SELF --- ADHERING
Reinstated after 7 Jun 2011 and may be used for new and
existing designs and acquisitions.
This specification is approved for use by the U.S. Army Edgewood
Chemical Biological Center and is available for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of self --- adhering, heat --- fusing plastisol mate-
rial for edgesealing laminated filter media to metal surfaces (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this specifica-
tion or recommended for additional information or as examples. While every effort has been
made to insure the completeness of this list, document users are cautioned that they must meet
all specified requirements of documents cited in sections 3 or 4 of this specification, whether or
not they are listed.
Comments, suggestions, or questions on this document should be addressed to: U.S. Army Edgewood
Chemical Biological Center, ATTN: RDCB --- DEA--- S, 5183 Blackhawk Road, Aberdeen Proving Ground,
MD 21010 --- 5424 or emailed to APGR--- ECBCSpecsTeam@conus.army.mil. Since contact information
can change, you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4240
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business