A-A-50606(SH)
2.2.2.4 The PHARS shall satisfy the operational characteristics without:
(a) Breakage of any component or leakage of any hydraulic fluid when dropped.
(b) Failure of any WARS component to operate as specified under the operational characteristics section of the salient characteristics description.
(c) A mechanical failure of the diesel power unit, spreader, ram or cutter (excluding removable tool tips) which requires a repair or adjustment requiring more than two (2) minutes to complete or a failure that totally disables the subject component such that a complete replacement of the subject component would be required.
(d) Any hydraulic fluid leakage from the diesel power unit, the hydraulic hose, the spreader, the ram or the cutter which requires a repair or adjustment requiring more than two (2) minutes to complete or a hydraulic leak which requires a total replacement of the subject component.
2.3 Technical Manuals.
2.3.1 Technical manuals and operational documentation as currently provided to commercial customers shall be enclosed with each deliverable PHARS unit with any addendums or attachments necessary to meet the following requirements:
2.3.1.1 General. The manual shall precisely reflect the hardware configuration of the equipment/system. The amount of data required shall be determined by the complexity/simplicity of the equipment. The manual shall consist of all data (volumes, folders, inserts, specification sheets, and other documents) required for operation and maintenance of the equipment/system as determined by the contracting activity.
2.3.1.2 Safety. The manual shall contain appropriate warnings, cautions and notes immediately preceding the point in the procedure where a hazard is likely to be encountered.
2.3.1.3 Hazardous substances. Information concerning the use, transportation, handling, storage or disposal of fuel, toxic or hazardous substance shall be clearly stated and shall be consistent with Federal Protection Standards.
2.3.1.4 Illustrations. The manual shall contain illustrations to support the text. The illustrations shall be integrated with the text or their location shall be referenced in the text. Illustrations shall be suitable for locating and identifying all components significant to operation and maintenance. Photographs shall be prescreened, sharp and with good contrast. Free hand sketches shall not be acceptable.
2.3.1.5 Preparation for use. The manual shall contain instructions for unpacking, assembling and readying for operation.
2.3.1.6 Operation. Operating instructions shall include the principles of
operation; illustrations and explanations of the uses and functions of all controls and indicators; initial set up; initial settings; and start up, normal operation, shutdown and emergency shutdown procedures.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business