A-A-50221
fewer than 12 equal (horizontal) arc increments around the equipment that inscribe the 85dB(A) contour. Sound level meter shall conform with ANSI S1.4 and manufacturer plus background noise level during test shall be recorded. Failure to comply shall constitute failure of this test.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practical.
Human factors engineering. The unit shall conform to human factors engineering criteria of MIL-STD-1472, 5.5 (Labeling), 5.9 (Design for maintainability), and 5.13 (Hazards and safety).
Packaging and marking. Military packaging shall be specified when shipments are to overseas Department of Defense (DoD) consignees. Commercial packaging may be specified for shipments to DoD consignees within the continental United States and to non-DoD consignees worldwide. When a supplier’s normal packaging will satisfy the requirements for military packaging, it may be used.
Military packaging. Each tool and its accessories shall be preserved and packed to protect against physical damage and deterioration in a logistic environment characterized by the following:
1. Multiple handling during transportation and intransit storage.
2. Shock, vibration and static loading forces during worldwide shipment by all transport modes.
3. Uncontrolled warehouse storage for extended periods.
4. Weather exposure during shipment and intransit transfers.
5. Stacking loads during shipment and storage.
The engine shall be internally preserved to protect combustion chamber and valves. Quantities of tools destined to a single address may be unitized into one or more unit loads.
Commercial. Each tool shall be packaged in accordance with the supplier’s normal method for retail distribution. Tools shipped to a single destination may be unitized to permit handling as a single unit. Shipping containers shall comply with Uniform Freight Classification or National Motor Freight Classification rules.
Marking. Unit, intermediate (when provided), and exterior packs shall be marked with the item nomenclature, stock or part number, quantity per pack, and contract number as a minimum: additional marking shall be as specified in the contract or order. Exterior packs shall have, in addition, the complete consignee’s address. Markings shall be applied in a legible manner, in a contrasting color, of an appropriate size, and of waterproof materials.
Quality assurance. The tools shall be examined for the following defects. Presence of one or more defects shall be cause for rejection.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business