MIL --- PRF --- 51525B
ASTM D 1056
Standard Specification for Flexible Cellular Materials ---
Sponge or Expanded Rubber
ASTM D 2867
Moisture in Activated Carbon
(Copies are available from www.astm.org or ASTM International, 100 Barr Harbor Drive,
West Conshohocken, PA 19428 --- 2959.)
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE AMS 3195
Silicone Rubber Sponge, Closed Cell, Medium
(Copies are available from SAE, 400 Commonwealth Dr., Warrendale, PA 15096 or
https://www.sae.org.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been ob-
tained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspec-
tions in accordance with 4.2.
3.2 Interface requirements.
3.2.1 Size and shape. Each gas filter shall be cylindrical in form. The filter shall be of a size
that easily fits inside the intended filter housings (Drawings 5 --- 19 --- 6120, 5 --- 19 --- 6121, and
53711 --- 6263500) and can be removed without damage. The filter shall conform to the inter-
face dimensions in Figure 1. Each end of the filter or end cover shall contain one groove for
gasket location. The gasket shall be grade number 2C1 of ASTM D1056 or silicone rubber per
SAE --- AMS --- 3195, be seamless, and have a thickness of 0.31 in. The gasket shall be perma-
nently attached to the filter with an adhesive.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business